manualshive.com logo in svg

Epson EPL-5900, Руководство по обслуживанию

Поделиться
Скачать
Epson EPL-5900 Скачать руководство пользователя страница 50

EPSON EPL-5900/EPL-5900L

Revision B

Product Description

Controller Specification

33

1.4.2.1  Parallel Interface Specifications

†

Interface Type
IEEE 1284 bi-directional high speed parallel interface

†

Operating Modes
Compatibility, Nibble, ECP

†

Connector Model Names
57RE-40360-830B (D7A) DDK or equivalent products

†

Conforming Plugs
Amphenol or equivalents

<EPL-5900>

The default device ID setting for EPL-5900 is as follows:

Carriage returns have been inserted into the list below to make it easier to read, but in 
actual practice the device ID values are displayed as a continuous character string, and 
no carriage return codes inserted. 
The CMD parameters are not in order. CID, MODE, or STATUS parameters are not 
included. 
The DES parameter is a combination of the MFG and MDL parameters with a space 
between them.

**

*1

;

MFG:EPSON;

CMD:PJL,EJL,ESCPL2,ESCP9,PRPXL24-01,PCL,HPGL2-01,ESCPAGE-04,PCLXL**

*2

;

MDL:**

*3

;

CLS:PRINTER;

DES:**

*4

;

MFG, MDL, DES and CID of Device ID are re-definable. (This must not be included 
in the manual.) And the CID field does not respond with the default value, but responds 
with the defined character string only when redefined.
Device ID when redefined is as follows. “xxxxx” is user-defined character string.

**

*1

;

MFG:xxxxx;

CMD:PJL,EJL,ESCPL2, ESCP9,PRPXL24-01,PCL,HPGL2-01,ESCPAGE-04;PCLXL**

*2

;

MDL: xxxxx;

CLS:PRINTER;

DES:xxxxx;

CID:xxxxx;

NOTE:

*1:

The hexadecimal value “the total number of Device ID char 2” is input.

*2:

Following text string is added when Adobe PS 3 kit ROM DIMM option is installed.

“,POSTSCRIPT”

*3:

The model name 

EPL-5900

*4:

DES is the text string that MFG and MDL is connected by a space.
“EPSON EPL-5900” for EPSON EPL-5900.

<EPL-5900L>

The default device ID setting for EPL-5900L is as follows:

MFG:EPSON;CMD:ESCPAGES-01;MDL:EPL-5900L;CLS:PRINTER;DES:EPSON EPL-5900L

The controller board is equipped with a jumper switch “JP1” for selecting the parallel 
interface's communication mode. If communication with the host is not possible for 
some reason, JP1 can be set in the “Nibble” position, a mode where ECP 
communication is not performed. (It is recommended that this jumper be set in the 
“ECP” position during normal use.) 

Nibble:  In the Reverse mode, communication with the host is conducted in the 

Nibble mode.

ECP:

If the host supports ECP, communication with the host is conducted in the 
ECP mode.

This switch is publicly disclosed to users.

Содержание EPL-5900






















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды