Epson Ensemble HD, Руководство по установке

Страница: 53 / 71

53
4
Use the following commands to raise and lower the screen, and to stop it at the desired position:
•
S-UP
to raise the screen
•
S-DWN
to lower the screen
When the screen comes to a stop, press
S-DWN
again to lower it beyond the current stop-position.
You can bring it down as far as the maximum length preset by the factory, or 64 inches.
•
S-STP
to stop the screen
5 Once the screen is positioned where you want it, press
S-SET
to set the screen position.
6
Press
S-UP
to raise the screen fully.
Note
You must raise the screen all the way for the new position to take effect.
7 Press
S-DWN
re-open the screen. Verify that it comes down and stops at the correct position.
Position the Image
1
Press the
Pattern
button on the projector’s remote control. This displays an adjustment pattern to help you
align the image.
2
Rotate the focus ring to sharpen the image. Rotate the zoom ring to resize the image so it fits on the screen.
Zoom Focus