EPSON Endeavor P60
System board components and connectors
Jumper Settings
Main system board jumper settings
SIMM Installation
Your computer comes with 8MB of memory on two 4MB
SIMMs. You can increase the memory up to 128MB using
1MB, 2MB, 4MB, 8MB, 16MB, and 32MB SIMMs (when
readily available).
The SIMM sockets are organized in two banks (Bank 0 and
Bank 1) consisting of two sockets each. You must install the
same type of SIMM in a bank.
The SIMMs you install must be 32-bit or 36-bit, 72-pin, 70ns,
tin-plated, fast-page mode, parity/no parity DRAM. The
table below lists the 16MB and 32MB SIMMs that are
approved for use in your system. You can install these
SIMMs or their equivalents.
Manufacturer
Description
Samsung
16MB; with
parity
Samsung
16MB; no parity
Hitachi
32MB; with parity
Part number
KM41C00BJ-7
KMM5324000BG-7
HM5117400J7
The table below lists possible combinations of SIMMs you
can install; do not use any configuration other than one of
those listed in the table.
SIMM configurations
EPSON Endeavor P60 - 4
3/94
