Epson EMP-8150 - XGA LCD Projector, Руководство администратора

Страница: 38 / 135

Displaying and Adjusting the Image
37
2. Press the red
Power
button on the control panel. You can also use
the
Power
button on the remote control, but make sure batteries
are installed and the remote control is turned on first. (See
page 89.)
The projector’s power light flashes green as the projector warms up,
and the projection lamp comes on in about 30 seconds. (To turn off
the lamp, see page 44.)
If you’re turning on the projector for the first time, you see the
following screen:
Set the date and time as follows:
1. Connect an interface device, such as a USB mouse or tablet, to the
projector (see page 34 for details). You can also use the remote
control as a mouse.
2. To change a setting, point to the
d
arrow next to it and click.
(With the remote control, use the
Enter
button to point and click.)
Power
Freeze
A/V Mute
E-Zoom
R/C ON
OFF
3
1
5
2
4
Enter
Esc
Power
Video Comp/
A/V mute
Resize
Esc Help
Menu
Shift
Keystone
Volume
Sync.
Sync.
T
ra
c
k
in
g
T
ra
c
k
in
g
Power button
remote control
on/off switch
warning
Never look into the lens when
the lamp is on. This can
harm your eyes.