Epson ELPMB61, Руководство по установке

Страница: 4 / 106

Using the Product Safely
2
Warning
Make sure you turn off the lighting track before performing work.
If you perform work while the lighting track is turned on, an electric shock could occur.
Make sure you use the safety wire supplied to connect the ceiling to the mount to prevent
the mount from falling due to earthquakes or vibrations.
Make sure you attach the safety wire supplied to the mount and the projector to prevent
the projector from falling.
Do not attach anything to this mount except for EPSON projector’s that are compatible
with this product.
If you attach a projector that is not compatible with this product, the mount could fall or be dam-
aged causing death or serious injury.
Check the catalog for projectors that are compatible with this product.
Note the following when handling the power cable. Otherwise, it could cause a fire or
electric shock.
•
Do not handle the plug with wet hands
•
Do not use a damaged or modified power cable
•
Do not apply excessive force to the power cable
•
Do not trap the cable between parts of the mount and so on during installation
Do not wind cables around the projector or the mount.
When wiring cables and so on, route the cables so that it avoids the screws and bolts.
If the cables come into contact with screws or bolts, it could cause a fire or electric shock to occur.
Make sure you tighten the screws or bolts completely when installing.
If they are not tightened completely, the mount or the projector could fall causing injury or accident
to occur.
Do not loosen or remove screws for no reason while installing or removing this product.
When securing the mount, do not use adhesives to prevent the screws from loosening,
and do not use lubricants, oils, and so on.
If you use adhesives to prevent the screws from loosening, or if you use things such as lubricants
or oils, the mount or the projector case may crack causing an injury or an accident.
Do not hang from the mount or the projector, and do not place heavy objects on them.
Otherwise, the mount or the projector may fall and could cause death or injury.
Do not apply excessive force to the projector or the mount when installing.
Otherwise, the mount or the projector may be damaged and could cause death or injury.
Do not install in the following situations. Contact your local dealer or Epson Service Call
Center.
•
If the product has been dropped or damaged before or during installation
•
If the mount is abnormal or damaged