Epson ELPMB30 Скачать руководство пользователя страница 4

4

For your safety, read the attached documents carefully to assemble and install this product correctly. Be sure to follow the 
safety precautions. After you have read all instructions, keep this information for later reference.

So that you can use the product safely and correctly, the following symbols are used to show dangerous operation or 
handling. The indications and their meaning are as follows. Make sure you understand them before reading the guide.

Carefully read the warnings in "Safety Instructions/Support and Service Guide" supplied with your projector before starting the 
installation to determine a suitable place to install it.

Safety Instructions

This symbol indicates information that, if ignored, could possibly 
result in serious personal injury or even death due to incorrect 
handling.

This symbol indicates information that, if ignored, could possibly 
result in personal injury or physical damage due to incorrect 
handling.

v

The installation work should be performed only by specialists with the required technical know-how and ability. 
Be sure to follow the instructions of this manual when installing this product.

Otherwise, the product may fall, and which may cause injury or an accident.

v

At least two people are needed for the installation. Make sure to provide a sturdy scaffold for this work.

Otherwise, you may fall or drop this product and may cause injury.

v

This product weighs about 3.5kg. Be careful when moving or transporting the product.

v

Do not install the product on an unstable ceiling or a surface at an angle.

The ceiling must be strong enough to install the projector and this product. Before installation, carefully check the weight 
of the projector and this product. Make sure to keep the enough strength of the ceiling and use the most appropriate 
methods to prevent the projector and this product from falling.

v

Do not set up this product in places where they might be subjected to vibration or shock.

Otherwise, the screws may be loosened and they may fall, which may cause injury or an accident.

v

Do not set up this product in the following places. Doing so may cause fire, electric shock, or an accident.

• In places where there is a lot of humidity or in places such as outdoors or in bathroom where the product may come in 

contact with water or rain.

• In places where there is a lot of humidity or dust, or in places such as near cooking or heating appliances where the 

product may come in contact with oily or cigarette smoke, or steam.

v

Always follow the instruction below to install this product. If installation is not carried out correctly, the projector 
and this product may fall and cause injury.

• Check the structure and materials of the mounting location and use the most appropriate construction method.
• Do not hang or mount anything except the specified projector from or on this product. Projectors that can be mounted 

on this product are listed in the catalogs.

• Do not hang from or apply excessive force to this product during or after installation.
• Be sure to tighten the screws firmly. Also, never loosen or remove any screws carelessly when mounting or removing 

this product.

• Never disassemble or modify this product unless otherwise indicated in this manual.

v

When loosening screws or the adjustment dials during installation, take care not to let this product fall.
Tighten all the screws and adjustment dials firmly after adjustment.

Otherwise, the product may fall, and which may cause injury or an accident.

v

Never loosen any bolts, screws, or nuts after installation. Also check periodically that no screws have come 
loose. If you find a loose screw, retighten it firmly.

Otherwise, the product may fall, and which may cause injury or an accident.

v

Applying threadlocker, lubricant, oil or other substance to the points at which the projector is fixed to this 
product may make the case crack and the projector may fall, and which may cause injury or an accident. Do not 
use any sort of adhesive, lubricant, or oil when installing or adjusting this product.

v

Be sure to turn off the projector when installing it. Also, do not plug or unplug the cables with wet hands.

Doing so may cause fire, or electric shock.

Warning

Caution

Warning

Содержание ELPMB30




















Отзывы: