Epson ELPLX02S, Руководство пользователя

Страница: 4 / 88

4
English
Fr
ançais
D
eutsch
Italiano
Español
中文
(
简体
)
中文
(
繁体
)
日本語
Warning
This symbol indicates information that, if ignored, could possibly
result in death or personal injury due to incorrect handling.
Caution
This symbol indicates information that, if ignored, could possibly re-
sult in personal injury or physical damage due to incorrect handling.
Warning
•
Disconnect the power cord from the projector before attaching or removing this product.
Attaching or removing while the power cord is connected could cause an electric shock.
• When attaching the product to the projector, make sure that it is securely installed and that
it is locked in place. If this product is not attached correctly it may fall, resulting in personal
injury or an accident.
• When removing dirt and dust from the product, do not use a spray that contains flammable
gas. The high heat generated inside the projector may cause a fire.
Caution
• When projecting, remove the lens cover from the front of the lens unit.
• Before attaching the lens unit, check the projector's model number. If this lens unit is at-
tached to a projector other than the specified projector, the lens unit or the projector could
be damaged.
• Be careful not to trap your finger when attaching this product to the projector. This may
cause an injury.
• Do not disassemble or remodel.
• Do not use or store the projector in places where it might be subjected to high and low
extremes of temperature. Also, avoid any sudden changes in temperature.
• Do not use or store the projector in places where smoke from oil or cigarettes may be pres-
ent, as it can adversely affect the quality of the projected images.
• Do not get it wet.
• Do not drop it or subject it to impacts. When putting this product down, make sure you
place it on a flat, stable surface.
• When moving the projector, do not hold the lens unit and decorative cover. They may come
off and the projector may fall causing an injury.
• Remove the lens unit when transporting the projector. If the projector is transported with
the lens unit attached, the lens unit or the projector could be damaged.