Epson EH-TW6600, Руководство пользователя

Страница: 44 / 123

Adjusting the Image
43
Viewing the Image at the Saved Image Quality
(Memory Function)
Saving Function
You can save the adjustment values for some images and image quality settings in the Configuration menu
for later use (Save Memory).
Because these saved adjustment values can be loaded from the remote control, you can easily switch to your
preferred image quality (Load Memory).
The following Configuration menu functions can be saved.
Image
s
p.75
Color Mode, Brightness, Contrast, Color Saturation, Tint, Skin Tone, Sharpness, Color Temp..,
Power Consumption, Auto Iris
Advanced Gamma, Offset, Gain, Hue, Saturation, Brightness, EPSON Super White
Signal
s
p.77
Deinterlacing, Motion Detection, Super-resolution
Advanced Noise Reduction, Setup Level, Overscan, HDMI Video Range
Saving a Memory
You can register a memory when Color Mode is set to anything except Auto .
a
Make settings that you want to save to
the Configuration menu.
b
Press the button.
c
Use the buttons to
select Save Memory , and then press
the button to confirm the
selection.
The Save Memory screen is displayed.
d
Use the buttons to
select the memory name to be saved,
and then press the
button to
confirm the selection.
The current projector settings are saved to
the memory.
If the mark on the left of the memory name
is turned aqua, it means the memory has
already been registered. When you select a
registered memory, a message is displayed
asking you to confirm that you want to
overwrite the memory. If you select
Yes , the
previous content is erased and the current
settings are saved.