Epson EH-TW420 Скачать руководство пользователя | Manualshive

Страница: 94 / 99

background image

Specifications

94

We:

Epson America, Inc.

Located at:

3840 Kilroy Airport Way
MS: 3-13
Long Beach, CA 90806

Tel:

562-290-5254

Declare under sole responsibility that the product identified herein,
complies with 47CFR Part 2 and 15 of the FCC rules as a Class B digital
device. Each product marketed, is identical to the representative unit
tested and found to be compliant with the standards. Records maintained
continue to reflect the equipment being produced can be expected to be
within the variation accepted, due to quantity production and testing on a
statistical basis as required by 47CFR 2.909. Operation is subject to the
following two conditions : (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.

Trade Name:

EPSON

Type of Product:

Projector

Model:

H285C/H284C/H283C

FCC Compliance Statement

For United States Users

This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio or television reception.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause interference to radio and television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures.
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

WARNING

The connection of a non-shielded equipment interface cable to this
equipment will invalidate the FCC Certification or Declaration of this device
and may cause interference levels which exceed the limits established by the
FCC for this equipment. It is the responsibility of the user to obtain and use a
shielded equipment interface cable with this device. If this equipment has
more than one interface connector, do not leave cables connected to unused
interfaces. Changes or modifications not expressly approved by the
manufacturer could void the user's authority to operate the equipment.

DECLARATION of CONFORMITY

According to 47CFR, Part 2 and 15

Class B Personal Computers and Peripherals; and/or

CPU Boards and Power Supplies used with Class B

Personal Computers

«
...
92
93
94
95
96
...
»

Содержание EH-TW420




































































































Отзывы:

Нет отзывов

Похожие инструкции для EH-TW420

Бренд: Eaton Страницы: 12

Бренд: Sven Страницы: 4

Бренд: NEC Страницы: 69

GSI Outdoor Leisure Series

Бренд: BenQ Страницы: 112

Бренд: Navitar Страницы: 7

Бренд: ProLights Страницы: 36

Бренд: Barco Страницы: 5

Бренд: Epson Страницы: 48

Dreamino EMP-TW20

Бренд: Epson Страницы: 56

Бренд: Epson Страницы: 81

BrightLink 450Wi - Interactive Projector

Бренд: Epson Страницы: 60

Dreamino EMP-TW680

Бренд: Epson Страницы: 58

Бренд: SKYTRONIC Страницы: 20

Бренд: Asus Страницы: 16

Бренд: Asus Страницы: 58

Бренд: Mitsubishi Electric Страницы: 4

Бренд: Mitsubishi Electric Страницы: 2

Бренд: Mitsubishi Electric Страницы: 37

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды