Configuration Menu
64
Function
Menu/Settings
Explanation
Operation
Direct Power
On
On, Off
You can set up the projector so that projection
starts as soon as the power cord is plugged in
without any button operations.
Note that when this is set to
On
, projection starts
if power is restored after a blackout or other
power outage and the power cord is still plugged
into the projector.
Sleep Mode
On, Off
If the set time is exceeded and no signal is input,
the projector is automatically turned off and en-
ters standby mode. When in standby mode,
press the power button on the remote control or
the standby button on the control panel to re-
start projection.
Sleep Mode
Timer
1 to 30 mins.
Sets the interval for
Sleep Mode
.
Illumination
On, Off
Set this to
Off
if the light from the indicators on
the control panel bother you when watching a
movie in a dark room.
High Altitude
Mode
On, Off
Set this to
On
if you are using the projector above
an altitude of 1500 meters.
Quick Startup Off, 20min., 60min.,
90min.
Set how long you want to Quick Startup mode to
be available. Turn off the projector to enter Quick
Startup mode. In Quick Startup mode, you can
project within seconds of pressing the power
button.
In Quick Startup mode, the standby power con-
sumption increases.
USB Power in
Standby (on-
ly some coun-
tries and re-
gions)
On, Off
When set to
On
, power is also supplied to the
streaming media player from the USB power ca-
ble when the projector is in standby mode (pow-
er off). If the internal temperature of the projector
gets too hot, power may stop automatically.
Log Save Des-
tination
Internal Memory, USB and
Internal Memory
Set where you want to save the logs.
Standby Mode
Communication Off, Communication On
Communication On
indicates that the projector
can be monitored over a network when the pro-
jector is in standby mode.
Language
-
Selects the display language.
Reset
Yes, No
Resets all
Extended
settings except for
Memo-
ry
,
Projection
,
High Altitude Mode
,
Standby
Mode
,
USB Power in Standby
and
Language
.
