Fax Setting Wizard
You can find the menu on the printer's control panel below.
Settings
>
General Settings
>
Fax Settings
>
Fax Setting Wizard
Note:
You cannot display this menu on the Web Config screen.
Selecting
Fax Setting Wizard
makes basic fax settings. Follow the on-screen instructions.
Related Information
&
&
“Making the Printer Ready to Send and Receive Faxes” on page 293
Basic Settings
You can find the menu on the printer's control panel below.
Settings
>
General Settings
>
Fax Settings
>
Basic Settings
Fax Speed:
Select the fax transmission speed. We recommend selecting
Slow(9,600bps)
when a communication
error occurs frequently, when sending/receiving a fax to/from abroad, or when you are using an IP
(VoIP) phone service.
ECM:
Automatically corrects errors in the fax transmission (Error Correction Mode), mostly caused by
telephone line noise. If this is disabled, you cannot send or receive documents in color.
Dial Tone Detection:
Detects a dial tone before starting to dial. If the printer is connected to a PBX (Private Branch
Exchange) or digital phone line, the printer may fail to start dialing. In this situation, change the
Line
Type
setting to
PBX
. If this does not work, disable this feature. However, disabling this feature may
drop the first digit of a fax number and send the fax to the wrong number.
Dial Mode:
Select the type of phone system to which you have connected the printer. When set to
Pulse
, you can
temporarily switch the dialing mode from pulse to tone by pressing ("T" is entered) while entering
numbers on the fax top screen. This setting may not be displayed depending on your region or
country.
Line Type:
Select the line type to which you have connected the printer.
When using the printer in an environment that uses extensions and requires an external access code,
such as 0 and 9, to get an outside line, select
PBX
. For an environment that uses a DSL modem or
terminal adapter, setting to
PBX
is also recommended.
Access Code
Select
Use
, and then register an external access code such as 0 or 9. Then, when sending a fax
to an outside fax number, enter # (hash) instead of the real code. # (hash) must also be used in
>
>
263
Содержание EcoTank ET-4856
