Epson EB-Z10000, Руководство по установке, Страница: 63 / 84

There are many glass parts and precision components inside the projector.
To prevent damage due to impacts when transporting, handle the projector
as follows.
Moving Nearby
Checking the following points, and then carry carefully by the handles.
•
Turn off the power to the projector and disconnect all cables.
•
Attach the cover to the lens.
When Transporting
Preparing packaging
After checking the points in "Moving Nearby", prepare the following and
then pack up the projector.
•
Remove the lens unit if an option lens, other than the standard zoom
lens, is installed. Attach the standard zoom lens if the projector has a
built-in lens. If the projector does not have a lens, attach the cover that
was on the lens mount when you purchased the projector.
•
Set the horizontal and vertical lens shift to the center.
s
"Adjusting the Position of the Projected Image (Lens Shift)" p.22
•
Fit the protective lens pad that was used at the time of purchase.
Notes when packing and transporting
Enclose the projector securely in buffer material to protect it from shock,
and place it into a strong cardboard container. Be sure to notify the carrier
company that the contents are fragile.
Notes on Transportation
63