Epson EB-S01, Руководство пользователя, Страница: 35 / 103

d
Using the [ ], [ ], [ ], and [ ] buttons on the remote control,
or the [
w
], [
v
], [
a
], and [
b
] buttons on the control panel, select
the corner to correct, and then press the [ ] button.
e
Using the [ ], [ ], [ ], and [ ] buttons on the remote control,
or the [
w
], [
v
], [
a
], and [
b
] buttons on the control panel, correct
the position of the corner.
When you press the [ ] button, the screen shown in step 4 is
displayed.
If the message "Cannot adjust any further." is displayed while
adjusting, you cannot adjust the shape any further in the direction
indicated by the gray triangle.
f
Repeat procedures 4 and 5 as needed to adjust any remaining
corners.
g
When you are done, press the [Esc] button to exit the correction
menu.
Because Keystone was changed to Quick Corner , the corner
selection screen shown in step 4 is displayed the next time you press
the [
w
] or [
v
] buttons on the control panel. Change Keystone to
H/V-Keystone if you want to perform horizontal and vertical
correction using the [
w
] or [
v
] buttons on the control panel.
s
Settings - Keystone - H/V-Keystone p.59
Adjusting Projected Images
35