Epson EB-L25000U, Руководство пользователя

Страница: 92 / 231

To continue to move another point, press the [Esc] button to return
to step 12, and then repeat steps 12 and 13.
To adjust another boundary line, press the [Esc] button until the
screen for selecting a boundary line from step 9 is displayed.
a
To return Black Level to its default value, press the [Esc]
button to return to the screen from step 7, select [Reset], and
then press the [
] button.
h
To complete the adjustment, press the [Menu] button.
Screen Matching
Adjust the tint and brightness for multiple projectors.
When projectors are connected to a network, the tint and brightness for
multiple projectors are automatically adjusted based on the darkest
projector.
When projectors are not connected to a network, or if auto adjustment
does not work, you can adjust the tint and brightness for all projectors
manually.
a
•
We recommend performing Screen Matching at least 20 minutes
after turning on the projector or canceling the shutter function.
•
To increase the accuracy of adjustments, we recommend darkening
the room while projecting images and then making adjustments.
•
Perform the following on the master projector before starting
adjustments.
- Set the
Color Mode to Multi-Projection with the remote
control's [Color Mode] button.
- Press the [Shutter] button on the remote control to release the
shutter function.
- Adjust the following items on the Image menu as necessary.
Brightness, Contrast, Color Saturation, Tint, White Balance,
Advanced
s
"Image Menu" p.119
- Set the brightness of the projected image.
s
"Setting the Brightness" p.67
•
When there are large differences in the brightness for each projector
due to aging light sources, perform Screen Matching again.
•
By using the scheduling function, you can automatically adjust the
tint and brightness at the time you set.
s
"Scheduling Function" p.105
•
See the following if Screen Matching does not work correctly.
s
"Automatic adjustments are not performed correctly" p.169
Operating conditions for auto adjustment functions
The auto adjustment functions for Screen Matching are enabled when the
following conditions are met.
•
The screen is flat without any curves or distortions
•
Using a matte white diffusion screen
•
The projection size is 100 to 300 inches
•
The projected image after tiling is rectangular
Multi-Projection Function
92