Adjusting the Image Height
50
If you are projecting from a table or other flat surface and the image is too
high or low, you can adjust the image height using the projector's adjustable
feet.
The larger the angle of tilt, the harder it becomes to focus. Locate the
projector so that it only needs to be tilted at a small angle.
a
Turn on the projector and display an image.
b
To adjust the front foot, pull up on the foot release lever and lift the
front of the projector.
The foot extends from the projector.
You can adjust the position up to approximately 10 degrees.
c
Release the lever to lock the foot.
d
If the image is tilted, rotate the rear feet to adjust their height.
A
Extend the rear foot
B
Retract the rear foot
If the projected image is unevenly rectangular, you need to adjust the image
shape.
