Epson EB-G6800, Руководство по установке, Страница: 8 / 94

Name Function
J
Audio Out port Outputs audio from the currently projected image to an
external speaker.
K
Monitor Out port Outputs to an external monitor the analog signal from the
computer connected to the Computer port or the BNC
port. You cannot output signals input from other ports or
component video signals.
L
DisplayPort Inputs video signals from DisplayPort compatible
computers. This projector is compatible with HDCP.
M
HDMI port Inputs video signals from HDMI compatible video
equipment and computers. This projector is compatible
with HDCP.
N
Audio3 port Inputs audio from equipment connected to the
DisplayPort or the HDMI port.
O
HDBaseT port
Connects a LAN cable to the optional HDBaseT
Transmitter.
s
p.41
P
LAN port
Connects a LAN cable to connect to a network.
Q
SDI port
(EB-G6900WU only)
Inputs SDI signals from a video equipment. This projector
supports SD-SDI (Standard Definition) and HD-SDI
(High Definition).
R
Service port Control port used when updating the projector's software.
This should not normally be used.
Base
Name Function
A
Front adjustable foot When setup on a surface such as a desk, extend the foot to
adjust the position of the image.
s
p.24
B
Rear feet When setup on a surface such as a desk, turn to extend and
retract to adjust the horizontal tilt.
s
p.25
C
Screw holes to fix the
cable cover Screw holes to fix the cable cover in place.
s
p.42
D
Security cable
installation point Pass a commercially available wire lock through here and
lock it in place.
s
p.77
Part Names and Functions
8