Epson EB-G5450WU, Руководство пользователя

Страница: 27 / 171

You can select the aspect mode according to the type of input signal, ratio
of height and width, and resolution to switch the Aspect Ratio
g of the
projected image. The aspect modes are listed below. The aspect modes that
can be set depend on the type of image that is being projected.
Aspect mode Explanation
Normal Projects to the full projection size retaining the
aspect ratio of the input image.
Auto Projects in an appropriate aspect ratio based on
information from the signal being input.
16:9
Projects to the full projection size at an aspect ratio
of 16:9.
Full *
Project at full size.
Zoom
Projects the input image enlarged to the full lateral
direction size as the aspect ratio remains. Parts that
extend beyond the projection size are not projected.
Native
Projects at the resolution of the input image size to
the center of the screen. This is ideal for projecting
clear images.
* To select Full while inputting 1080i signal, set Progressive in the
Configuration menu to Off .
s
p.53
Procedure
Remote Control
The aspect mode name is displayed on the screen by pressing the button.
If you press the button while the aspect mode name is displayed on the
screen, it changes to the next aspect mode.
q
The aspect mode can also be set using Aspect in the Signal menu
from the configuration menu.
s
p.53
Changing the Aspect Mode
Projecting images from video equipment or from the HDMI input
port
Each time the [Aspect] button on the remote control is pressed, the aspect
mode changes in the order
Auto , 16:9 , Full , Zoom , and Native .
s
p.27
Example: 720p signal input (resolution: 1280x720, aspect ratio: 16:9)
A
Auto
B
16:9
Changing the Aspect Ratio of the Projected Image
27