Epson EB-470, Руководство пользователя

Страница: 25 / 165

Warning
•
A special method of installation is required when suspending the projector
from a wall or ceiling. If it is not installed correctly, it could fall causing an
accident and injury.
•
If you use adhesives on the wall mount plate fixing points or the ceiling
mount fixing points to prevent the screws from loosening, or if you use
things such as lubricants or oils on the projector, the projector case may
crack causing it to fall from its mount. This could cause serious injury to
anyone under the mount and could damage the projector.
When installing or adjusting the mount, do not use adhesives to prevent the
screws from loosening and do not use lubricant or oil and so on.
•
Do not cover the projector's air intake vent or air exhaust vent. If either of
the vents are covered, the internal temperature could rise and cause a fire.
a
•
When mounting the projector on a wall or ceiling, or placing the
projector vertically, make sure you use the correct tools for the
installation method.
s
"Optional Accessories" p.146
•
The default Projection setting is Front/Upside Down . You can
change to other Projection settings from the Configuration menu.
s
Extended - Projection p.103
•
You can change the Projection setting as follows by pressing down
the [A/V Mute] button on the remote control for about five seconds.
Front
W
Front/Upside Down
Rear
W
Rear/Upside Down
Installing the Projector
25