Installation Guide
23
S
Projected image size
a
Projection Dis‐
tance
Minimum (Wide)
to Maximum
(Tele)
b
Numbers on the
arm slide scale
c
Distance from
projected image
to wall plate
h
Height of projec‐
ted image
64"
130.0x97.5
14.0 - 29.7
22.7 - 38.4
20.7
97.5
65"
132.1x99.1
14.7 - 30.7
23.4 - 39.4
21.0
99.1
66"
134.1x100.6
15.4 - 31.1
24.1 - 39.8
21.3
100.6
67"
136.1x102.1
16.1 - 31.1
24.8 - 39.8
21.6
102.1
68"
138.2x103.6
16.8 - 31.1
25.5 - 39.8
21.9
103.6
69"
140.2x105.2
17.5 - 31.1
26.2 - 39.8
22.2
105.2
70"
142.2x106.7
18.2 - 31.1
26.9 - 39.8
22.5
106.7
71"
144.3x108.2
18.9 - 31.1
27.6 - 39.8
22.8
108.2
72"
146.3x109.7
19.6 - 31.1
28.3 - 39.8
23.2
109.7
73"
148.3x111.3
20.3 - 31.1
29.0 - 39.8
23.5
111.3
74"
150.4x112.8
21.0 - 31.1
29.7 - 39.8
23.8
112.8
Images smaller than 53 inches are not projected correctly.
c
•
The values are only rough estimates. The value may differ depending on the location where you place
the projector.
•
When projecting in Tele, the quality of the projected images may decrease.
•
When projecting images at 4:3, the images are resized automatically and the quality of the projected
images may decrease.
When Projected Image is Larger than 75 Inches
Mount the 3-axis adjustment unit at the position marked with a
stamp (
).
The projection distance table provides the figures when mounting the 3-axis adjustment unit at the position
marked with a
stamp (
). The numbers on the arm slide scale (b) is the same as the projection
distance (a).
The distance (c) from the projected image to the wall plate is the number given when the vertical slide is set
to the standard position (
).
Match the notch on the setting plate to the position of the stamp on the wall plate.
