Troubleshooting
80
f
Cannot connect in "Advanced Connection Mode" or wired LAN connection
f
The Slideshow cannot be displayed on the desired display when the multi-screen display function is being executed.
f
Applications are no longer displayed from the computer's screen when the multi-screen display function is executed.
f
The mouse cursor is not displayed on the computer's screen.
Check
Remedy
Is the SSID setting different.
Set the computer, the access point, and the projector to the same SSID.
s
Is the same WEP key set?
When selecting WEP from "Security", set the access point, the computer, and the projector to the same WEP
key.
s
"Network Menu (EMP-1715/1705 Only)"
Are the connection denial functions, such as MAC
address restrictions and port restrictions, set correctly
at the access point?
Set the projector to allow connections from the access point.
Are the IP address, the subnet mask, and the gateway
address for the access point and the projector set
correctly?
When not using a DHCP, adjust each setting.
s
"Network Menu (EMP-1715/1705 Only)"
Are the access point and the projector’s subnet
different?
Select "Manual search" from EMP NS Connection, specify the IP address, and connect.
Check
Remedy
Are you using PowerPoint 2002 or an earlier version?
To set and use two or more virtual displays, use PowerPoint 2003, or limit the number of virtual displays to
one before displaying the Slideshow.
Check
Remedy
Is another application running on the virtual display?
When EPSON Virtual Display is installed, another application sometimes runs on the virtual display. In this
case, set "EPSON VirtualDisplay" to "Off" at "Screen properties".
Check
Remedy
Is EPSON Virtual Display installed?
The mouse cursor was moved onto the virtual display. Move the mouse until the mouse cursor is displayed.
For Windows
For Windows
For Windows
Содержание EasyMP EMP-1705
Страница 1: ...1 Operation Guide ...