Epson DM-D110 Series, Техническое справочное руководство

Страница: 4 / 110

4
Warnings
Cautions
WARNING

To avoid risk of electric shock, do not set up this product or handle cables during a thun-
derstorm.

Never insert or disconnect the power plug with wet hands.

Doing so may result in severe shock.

Handle the power cable with care.

Improper handling may lead to fire or electric shock.

Do not modify or attempt to repair the cable.

Do not place any heavy object on top of the cable.

Avoid excessive bending, twisting, and pulling.

Do not place the cable near heating equipment.

Check that the plug is clean before plugging it in.

Be sure to push the plug all the way in.

Be sure to use the specified power source.

Connection to an improper power source may cause fire or shock.

Do not place multiple loads on the power outlet.

Overloading the outlet may lead to fire or shock.

Shut down your equipment immediately if it produces smoke, a strange odor, or unusual
noise
.

Continued use may lead to fire. Immediately unplug the equipment and contact your dealer
or a Seiko Epson service center for advice.

Never attempt to repair this product yourself.

Improper repair work can be dangerous.

Never disassemble or modify this product.

Tampering with this product may result in injury or fire.

Do not allow foreign matter to fall into the equipment.

Penetration by foreign objects may lead to fire.

If water or other liquid spills into this equipment, do not continue to use it.

Continued use may lead to fire. Unplug the power cord immediately and contact your dealer
or a Seiko Epson service center for advice.

Do not use aerosol sprayers containing flammable gas inside or around this product.

Doing so may cause fire.

Do not connect cables in ways other than those mentioned in this manual.

Different connections may cause equipment damage or fire.

Do not use this product in locations subject to high humidity or dust levels.

Excessive humidity and dust may cause equipment damage or fire.
CAUTION

Be sure to set this equipment on a firm, stable, horizontal surface.

The product may break or cause injury if it falls.

Do not place heavy objects on top of this product. Never stand or lean on this product.

Equipment may fall or collapse, causing breakage and possible injury.

To ensure safety, unplug this product before leaving it unused for an extended period.

Do not drop the this product because you may damage the built-in vacuum fluorescent
display.

Using in the presence of silicon gas (silicon adhesive, silicon oil, silicon powder, etc.)
including siloxane and of malignant gas (nitric acid, hydrosulfuric, ammonia, chlorine,
etc.) may cause contact failure at contact points in a mechanical switch, etc., in a short
time because of adhesion or oxidization of the insulation film.