Troubleshooting
95
Error associated with drive
Lights
Conditions/Remedies
Power
Busy
Error
Ink
Stacker
1
2
3
Drive tray open/close error
Turn off the product, unplug the power cord, and
check inside for any objects. Then, publish the
disc again. If the same error occurs frequently,
contact your dealer.
Internal drive error
Turn off the product, unplug the power cable,
and then check the inside of the drive. If the same
error occurs frequently, contact your dealer.
Writing/reading error
The error could not be cleared even if it repeated
itself for the retry number of times.
Disc may have a problem. Replace the disc and
resume job.
If the same error occurs frequently, contact your
dealer.
Invalid disc error
An invalid disc error has occurred, such as the disc
may not be blank or the disc does not have
enough space. Or, the disc loaded in the stacker
differs from the disc type you set in the EPSON
Total Disc Setup Properties dialog box.
The error could not be cleared even if it repeated
itself for the retry number of times.
Check that the disc is blank and not damaged.
Then, in the EPSON Total Disc Setup Properties
dialog box, select the disc type that is the same as
the discs loaded in the stacker. If you use the
proper disc but the same error occurs frequently,
contact your dealer.
Содержание Disc Producer PP-50
