7
Paper Entry Guide / Camera System
Camera and LED for Front Printer
6-30
DJet 300-500-700
– HW Installation Manual
D
J
e
t
H
W
S
e
tu
p
v
2
.0
Use the camera screw to mount the camera.
Place the camera system from the profile edge as
shown in the picture.
Note
You may need to fine adjust the position of the
camera/light module sideward to get an appropriate
camera image from the code bar.
Check this when the paper is loaded and the first
“Load Job” is printed.
T7 approx. 240 mm
T5 approx. tbd mm
T3 approx. 280 mm
