Epson D-Jet 300, Руководство по установке и настройке

Страница: 17 / 54

Software Configuration
Set Input and Output Format
3
Installation Manual
– Configuration DJet Software
3-1
D
J
e
t
D
I7
4
6
7
1
8
-2
1
E
N
3 Software Configuration
3.1 Set Input and Output Format
Open the menu Parameters -> Parameter
conversion
(1) Choose the input format which reflects the
prepress workflow
rip’s output. The input path is the
folder where the TIFF files are exported from the
Prepress Workflow Rip.
(3) Choose the
output format “Epson DJet”. Set the
output directory to point into the DI-Pilot input folder.
The output path is the input path for the DI-P i lot
Output Manager software.
Parameter name Function
(1) Input format and input path Setup the input bitmap format and directory from your workflow.
(2) Flip/Negative Depending on the workflow setup you may have to set the check
boxes “Flip” (= mirroring) or “Negative.
(3) Output format and output path The output fo
rmat is “Epson DJet”. Select an output directory
where the generated files are stored and further processed by
DI-P i lot.
(4) Front/Back enable Enable the double sided output for the DJet. Activate the
checkbox
“Front/Back Enable”.
(5) Border Lines Creates a thin border line around the job size limits
(6) Add Out Select an additional output like CIP3, Inkzone or JDF data. After
the DJet data processing the selected output data is additionally
produced.
(7) Resolution Bitmap calculation resolution. Note: this is not the printing
resolution. The printing resolution is set in the menu PageSetup.