3
Installing Printer Software for
Macintosh
Connecting the EPSON Stylus CX5200
Before you start, make sure you set up your EPSON Stylus
®
CX5200 and install
ink and paper, as described on the
Start Here
sheet. Then follow these steps to
connect the EPSON Stylus CX5200 to your Macintosh.
®
1. Remove the sticker from the USB port on the back of the Stylus CX.
2. Connect the square end of the USB cable to the USB port on the Stylus CX.
3. Then connect the flat end of the cable to a USB port on your Macintosh.
4. Follow the instructions in one of the next sections to install the printer
software on your Macintosh.
Flat end
Square end
cx5200supplement.book Page 3 Wednesday, November 6, 2002 1:55 PM
