Epson CO-FH02, Руководство пользователя, Страница: 59 / 121

59
2. To prevent changes to the User's Logo screen or related display settings, select User's Logo
Protect and set it to On .
You can attach the Password Protect sticker to the projector as an additional theft deterrent.
Note: Be sure to keep the remote control in a safe place; if you lose it, you will not be able to enter the
password required to use the projector.
Parent topic: Password Security Types
Entering a Password to Use the Projector
If a password is set up and a Power On Protection password is enabled, you see a prompt to enter a
password whenever you turn on the projector.
You must enter the correct password to use the projector.
1. Enter a four-digit password by pressing the arrow and Enter buttons. To select numbers from 5 to 9,
press the menu button.
2. If the password is incorrect, the following may happen:
• You see a "wrong password" message and a prompt to try again. Enter the correct password to
proceed.
• If you have forgotten the password, make note of the Request Code: xxxxx number that appears
on the screen and contact Epson Support.
• If you enter an incorrect password five times in succession, you see a message telling you that the
projector is locked. After the message is displayed for 5 minutes, the projector enters standby
mode. Unplug the projector, plug in the power cord, and turn on the projector. You see a prompt to
enter the password.
• If you continue to enter an incorrect password 30 times in succession, the projector displays a
request code and a message to contact Epson Support. Do not attempt to enter the password