Epson C823781, Руководство администратора

Страница: 93 / 258

4
EpsonNet MacAssist Configuration Utility 81
4
4
4
4
4
4
4
4
4
4
4
Search options-IP
To search for the print servers in other segments, set the specific
network address and subnet mask. The settings you modified on
this screen do not affect the search parameters used for EpsonNet
MacAssist EasySetup.
Select Use the search option to search for a print server in
another segment. Do not select it if the print server you want to
configure is located in the same segment.
Enter the network address and subnet mask (valid range 0 to 255).
Ask your network administrator for the address. Then click
Add .
You can add up to 20 addresses. To remove the address from the
list, select the address and click
Delete .
Select Refresh from the Device menu or restart EpsonNet
MacAssist for the settings to take effect.
Note:
❏
If you try to add an incorrect network address, the following message
appears: “The network address XXX.XXX.XXX.XXX that you
entered will be added to the list as XXX.XXX.XXX.X. Add this
address?” Check the correct network address and then click
OK to
add it.
❏
If you try to add the same network address, the message“This
network address has already been registered” appears, which
indicates this address cannot be added.