Epson C31C489111 - TM J7000P B/W Inkjet Printer, Руководство пользователя, Страница: 96 / 149

Version 2.65 Jul. 2009
91
User's Manual
Installer, SetupPOS, TMUSB
At this moment, DataEvent is not sent. Afterwards, when DeviceEnabled
is set to TRUE, DataEvent is sent.
(AutoDisable UPOS specifications)
For "Open, Claim":
Immediately after SO receives the data notified as DataEvent,
DeviceEnabled is set to FALSE.
At this moment, DataEvent is sent (EPSON specific specifications).
Usually, select "Open, Claim&Enable" (recommended).
To upgrade OPOS ADK from version 1.5x or earlier and enable the
existing applications to run in the new version without any modification,
use "Open, Claim”.
The specifications for operations are different in pre-Ver2.60 and
Ver2.60. Select which specification. These are settable only for the
EPSON OPOS ADK of the starting from Ver2.60.
(3) When the specification starting from OPOS Ver2.60:
The specifications for the initialization, devices with hydra
connection, and Error Event are operated in compliance with
UPOS1.11. (UPOS Specification)
(4) When the specifications prior to OPOS Ver2.60:
The specifications for the initialization, devices with hydra
connection, and Error Event are operated in compliance with the
specifications Pre-Ver2.60. (EPSON Specification)
The default setting is different by the condition.
Condition Default setting
Without the installation of EPSON OPOS ADK in
advance Ver2.60
specification
When the prior to Version 2.60 of EPSON OPOS
ADK already has been installed Pre-Ver2.60
specification
The target categories are as follows:
<Initialization processing>
POSPrinter
LineDisplay
CashDrawer
(ElectronicJournal)