Version 2.61 Feb. 2008
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-U230)
4
buzzer) to match the environment of use.
Make other settings in accordance with the settings described above.
4) Ethernet
Port
DIP-SW1
DIP-SW2
No. Setting
No. Setting
1
OFF
Recommended
1
OFF
Fixed at OFF
2
OFF
Recommended
2
ON
Fixed at ON
3
OFF
Fixed at OFF
3
OFF
Fixed at OFF
4
OFF
Fixed at OFF
4
ON
Fixed at ON
5
OFF
Fixed at OFF
5
ON
Settable
6
OFF
Fixed at OFF
6
OFF
Fixed at OFF
7
OFF
Fixed at OFF
7
OFF
Fixed at OFF
8 OFF Recommended
8 OFF Settable
It is possible to change the settings of DIP-SW1-1, 2 and 8, but it is
recommended to leave them OFF.
Set DIP-SW2-5 (PAPER OUT LED blinking pattern) and DIP-SW2-8 (Internal
buzzer) to match the environment of use.
Make other settings in accordance with the settings described above.
2.3 Port Information
1) Port information when serial port is used
The port information that can be set with the SetupPOS utility is as follows.
Item Setting
range
Baud rate [bps]
4800,9600
Bit length [bit]
8
Parity
NONE, ODD, EVEN
Stop bit [bit]
1
Handshake DTR/DSR
Output buffer length [byte]
32 to 1024
Output interval time [ms]
0 to 9999
