No
EPSON
TITLE
EPSON Advanced Printer Driver for TM series
TM
Printer Driver
User’s Manual
Revision
L
NEXT
30
SHEET
29
10.2.3.Reverse
Specification Remarks
Driver name
EPSON TM-T90 Reverse
Version3.03
Supported Printer
font name
Not Supported
Supported printer
font name for bar
Code
Not Supported
Supported printer
font name for
Special function
Not Supported
Supported printer
font name for
Extended special
function
Not Supported
Supported
resolution
203 x 203
Supported paper
size
80 x 297mm(203)
60 x 297mm
58 x 297mm(203)
XX x YY (T90 Reverse)
Win95/98only
User-Defined
(52.6x25.4 to 72.1x297 mm)
Supported paper
source
Form[No cut]
Form[Cut]
Form[No feed]
Supported print
Quality
None
Notes on upside-down printing
1.
The driver enables to rotating the printing result 180 degrees to perform upside-down printing on each page. The
maximum length of the page is 297mm.
2.
If XX x YY (T90 Reverse) is selected for paper size, specify the number of dots for the printing area of the upside-down
printing in the section of TMCTRL.INI below. Then the area for the upside-down printing can be set freely.
(Default is the printing area for 80 mm width paper.)
[TM-T90 Reverse]
Width=576
3.
When the paper size XX x YY (T90 Reverse) is selected and if there is no definition described in 1., use the value of the
printer that has been already defined (the paper size selected from the printer property sheet) as the printing area to
process the upside-down printing.
4.
Be sure that the paper size selected from the printer property sheet and the paper size selected by an application are the
same. If they are different, horizontal and vertical lengths of printing paper might not be obtained correctly and the
upside-down priting might not be done correctly.