101
Scanning Reflective Documents
To scan reflective documents with the transparency unit installed, insert the reflective
document mat included with the transparency unit.
1. Open the transparency unit. If there’s a film guide on the document table, remove it.
2. Insert the tabs on the reflective document
mat into the slots on the transparency unit
and slide the mat down until the tabs are
secure.
3. Place your document face down on the
document table and close the transparency
unit.
4. Scan according to instructions in
“Step-by-Step Scanning Instructions” on
page 57.
saffron.book Page 101 Tuesday, January 11, 2000 2:32 PM
