Items
Explanation
Binary
Set whether to accept the binary data or not.
PDF Page Size
Set the paper size for PDF printing.
Setting Up AirPrint
Set when using AirPrint printing.
Access Web Config and select the
Network
tab >
AirPrint Setup
.
Items
Explanation
Bonjour Service Name
Enter the Bonjour service name between 1 and 41 characters in ASCII (0x20-0x7E).
Bonjour Location
Enter location information such as the printer's placement within 127 bytes or less
in Unicode (UTF-8).
Geolocation
Latitude and Longitude (WGS84)
Enter the printer's location information. This entry is optional.
Enter values by using WGS-84 datum, which separates latitude and longitude with
a comma.
You can enter -90 to +90 for the latitude value, and -180 to +180 for the longitude
value. You can enter less than a decimal to the sixth place, and you can omit "+".
Top Priority Protocol
Select top priority protocol from IPP and Port9100.
Wide-Area Bonjour
Set whether or not to use Wide-Area Bonjour. If you use it, the printers must be
registered on the DNS server to be able to search the printer over the segment.
Require PIN Code when using IPP
printing
Select whether or not to require a PIN code when using IPP printing. If you select
Yes
, IPP print jobs without PIN codes are not saved in the printer.
Enable AirPrint
IPP, Bonjour, AirPrint are enabled, and IPP is established only with secure
communication.
Configuring a Mail Server
Set the mail server from Web Config.
When the printer can send the email, receiving the email notification from the printer is enabled.
Check below before setting up.
❏
The printer is connected to the network that can access the mail server.
❏
Email setting information of the computer that uses the same mail server as the printer.
Note:
When you use the mail server on the Internet, confirm the setting information from the provider or website.
1.
Access Web Config and select the
Network
tab >
Email Server
>
Basic
.
2.
Enter a value for each item.
>
>
235
