Epson AL-M200 Series, Руководство пользователя

Страница: 151 / 232

Power Off
Timer
*2
Power Off
Timer On *1 Enables/Disables Power Off mode, which
automatically turns off the printer’s main power at the
time specified in
Time to OFF .
On , Off
Time to OFF
480min
*1 Specifies the time taken by the printer to enter the
Power Off mode after it has entered Sleep mode.
You can adjust the time before power management is
applied. Any increase will affect the product's energy
efficiency. Please consider the environment before
making any change.
120min - 480min
*1
Factory default menu setting
*2
For users in Euro, the Middle East, Africa, and Russia only
Select 1min (default) for Low Power Timer if your printer shares an electrical circuit with your room
lights and you notice them flickering. Otherwise, select a high value to keep your printer available for
frequent use with the minimum warm-up time.
The printer automatically exits a power saver mode when it receives a print job from a computer.
Alternatively, you can manually bring it back to the ready-to-print state by pressing the
( Energy
Saver ) button. Whether the printer is in Low Power or Sleep mode, it will take about 25 seconds for
the printer to resume the ready-to-print state.
If you select On for Power Off Timer , the printer switches to the Power Off mode from the Sleep
mode after the time specified for Time to OFF and automatically turns off. To exit the Power Off
mode, turn on the power switch.
Auto Reset
Purpose:
To specify a time period before the printer restores the default setting for the current menu item and
resumes the ready-to-print state when an attempt to change the setting is left unfinished.
Values:
45sec
*
1min
2min
3min
4min
*
Factory default menu setting
AL-M200 Series User’s Guide
Using the Operator Panel Menus 151