Epson AcuLaser M1400 Series, Руководство по технике безопасности

Страница: 7 / 182

❏
Wait at least one hour before using a toner cartridge after moving it from a cool to a warm
environment to prevent damage from condensation.
❏
To get the best print quality, do not store the toner cartridge in an area subject to direct sunlight,
dust, salty air, or corrosive gases (such as ammonia). Avoid locations subject to extreme or rapid
changes in temperature or humidity.
❏
Do not let the paper’s edge slide across your skin because the edge of the paper may cut you.
Safety Information
Ozone safety
Ozone emission
Ozone gas is generated by LED printers as a by-product of the printing process. Ozone is produced
only when the printer is printing.
Ozone exposure limit
The Epson LED printer generates less than 1.5 mg/h of continuous printing.
Minimize the risk
To minimize the risk of exposure to ozone, you should avoid the following conditions:
❏
Use of multiple LED printers in a confined area
❏
Operation in conditions of extremely low humidity
❏
Poor room ventilation
❏
Long, continuous printing together with any of the above
Printer location
The printer should be located so that the exhaust gases and heat generated are:
❏
Not blown directly into the user’s face
❏
Vented directly out of the building whenever possible
Epson AcuLaser M1400 Series Safety Information Guide
Safety Instructions 6