Epson Aculaser M1200 series, Руководство пользователя

Страница: 59 / 139

Chapter 5
Setting Up Your Printer on a Network (AcuLaser M1200)
For Windows Users
Sharing the printer
This section describes how to share the printer on a standard Windows network.
The computers on a network can share a printer that is directly connected to one of them. The
computer that is directly connected to the printer is the print server, and the other computers are
the clients which need permission to share the printer with the print server. The clients share the
printer via the print server.
According to the versions of Windows OS and your access rights on the network, perform the
appropriate settings of the print server and clients.
Setting the print server
See “Using an additional driver” on page 59.
Setting the clients
See “With Windows Vista, Vista x64, XP, XP x64, or 2000” on page 63.
Note:
❏
When sharing the printer, be sure to set EPSON Status Monitor 3 so that the shared printer can
be monitored on the print server. See “Order Online” on page 41.
❏
The print server and clients should be set on the same network system, and they should be under
the same network management beforehand.
Using an additional driver
When the print server’s OS is Windows Vista, Vista x64, XP, XP x64, or 2000, you can install the
additional drivers on the server. The additional drivers are for client computers that have different
OS from the server.
EPSON AcuLaser M1200 Series User’s Guide
Setting Up Your Printer on a Network (AcuLaser M1200) 59