Epson AcuLaser CX37DNF Guide, Руководство пользователя

Страница: 39 / 86

Sending a Fax Manually
Sending a Fax Manually After Using the Telephone
If the machine is connected to a telephone and the same line is used for both phoning and faxing, the
document can simply be sent after talking with the recipient over the phone.
This is useful, for example, if you want to tell the recipient that you are sending a fax.
1. Load the document into the ADF.
Note:
❏
When sending a fax manually, load the document into the ADF. An error will occur if the
document is placed on the original glass.
❏
For details on loading the document into the ADF, refer to “Sending a Fax Using the ADF” on
page 22.
2. If desired, select the image quality.
Note:
For details, refer to “Selecting the Image Quality” on page 26.
3. Pick up the handset and check that the dial tone can be heard.
4. Specify the fax number of the recipient by using the telephone to dial the fax number.
Note:
❏
The fax number of the recipient can also specified using the keypad in the control panel of this
machine.
❏
If Pulse is selected as the telephone line type, press the key to temporarily change the line type to
Tone.
5. After finishing talking on the phone, the recipient should press the necessary key to start receiving
the fax.
Once the recipient’s fax machine is ready, a beep is sounded.
6. Press the Start key to begin scanning and sending the fax.
7. Replace the handset to its cradle.
Epson AcuLaser CX37DNF Facsimile User’s Guide
Sending Faxes 39