Epson AcuLaser C9100, Справочное руководство

Страница: 225 / 438

Maintenance and Transportation
225
7
7
7
7
7
7
7
7
7
7
7
7
If a consumable product reaches the end of its service life, the
printer stops printing and displays the following messages on the
LCD panel or the window of EPSON Status Monitor 3. When this
happens, the printer cannot resume printing until you replace the
depleted consumable products.
* The letters C, M, Y, or K appear in this position, indicating the color of the
toner to be replaced. For example, the message Y Toner Low means that
the amount of toner remaining in the yellow toner cartridge is low.
Note:
Messages appear for one consumable product at a time. After replacing
a consumable product, check the LCD panel for replacement messages
for other consumable products.
Even if
Replace Toner uuuu
or
Replace Photocondctr
is
displayed on the LCD panel, you can print an additional sheets
by pressing the
N
Start/Stop button on the control panel. The
message on the LCD panel changes from
Replace Toner uuuu
or
Replace Photocondctr
to
uuuu Toner Low
or
Worn
Photocondctr .
Note:
❏
Print quality cannot be guaranteed when printing with a worn
consumable product. If print quality is not what you expected,
replace the consumable product.
❏
The printer stops printing if printing with a worn consumable
product might damage the printer. If the printer stops printing,
replace the consumable product.
LCD Panel Message Description
Replace Toner uuuu* The toner cartridge for the indicated color is
empty.
Replace Photocondctr The correct photoconductor unit is not used.
Printing has stopped to avoid damage to the
engine.
Replace Waste T Box The waste toner collector is full.