Epson ActionPrinter 3000, Руководство пользователя, Страница: 37 / 125

Using Single
Sheets
Note: If the platen turns without loading the paper, completely
remove the paper and reinsert it more firmly. Then press the
AUTO LOAD
button again.
CAUTION: Never advance the paper using the platen knob
while the printer is turned on.
5. Press the
ON LINE
button to set the printer on line.
To eject the paper, set the printer off line (by pressing the
ON LINE
button) and then press the
FORM FEED
button.
Reloading during printing
When you print a document of more than one page using single
sheet paper, there are two ways your software may leave your
printer at the end of a page:
l
If your software sends characters in a continuous stream, the
printer stops printing when it reaches the bottom of the paper.
When this happens, the page ejects and the
ON LINE
light goes
off automatically.
l
If your software handles printing page by page, it probably
stops sending characters at the end of a page and prompts you
to insert more paper. In this case, the
ON LINE
light may remain
on. If it does, press the
ON LINE
button once to take the printer
off line.
In either case, once the
ON LINE
light is off, remove the sheet that
has just been printed and load a new sheet as before. Press the
ON LINE
button to start printing the next page.
Paper Handling 2-5