Epson ActionPrinter 2000, Руководство пользователя

Страница: 30 / 127

Using Single Sheets
4. Slide the paper down between the edge guides until it meets
resistance.
5.
Press the
LOAD/EJECT
button once to load the paper.
Note:
If the platen turns without loading the paper, remove the
paper and re-insert it more firmly. Then press the
LOAD/EJECT
button again.
CAUTION:
Never advance the paper using the platen
knob while the printer is turned on.
6.
Press the
ON LINE
button to set the printer on line.
To eject the paper, set the printer off line (by pressing the
ON LINE
button) and then press the
FORM FEED
button.
Printing multiple-page documents
When you print a document of more than one page using single-
sheet paper, you must reload paper at the end of each page. To
reload, first see that the printer is off line. (If the
ON LINE
light is
on, press the
ON LINE
button once to take the printer off line.)
Then load a new sheet by following steps
4, 5,
and
6
above.
If your software has not been set up properly, the printer may
print too low on the second page of a document or print the last
few lines of one page on the next. If this happens, see Tips for
printing on single sheets at the beginning of this manual for
instructions on how to correct the problem.
Paper Handling
2-3