manualshive.com logo in svg

Epson ActionNote 866C, Руководство пользователя, Страница: 109 / 139

Поделиться
Скачать
Epson ActionNote 866C Скачать руководство пользователя страница 109

Software Problems

If you are having trouble with an application program, try the
following solutions:

1.

If the application program does not start, check that you are
following the correct procedure for starting the program,
and that it is installed correctly.

2.

If the program is running, see if it includes on-line help to
assist you in diagnosing the problem.

3.

Your computer can run at either high speed or low speed.
While almost all programs work properly at high speed,
some must run at the slower speed. Check your software
manual to see if this is the case, and change the 

CPU Speed

setting in Setup if necessary. See Chapter 1 for instructions.

4.

If you have entered an MS-DOS command that you want to
stop, press 

Ctrl C 

or 

Ctrl Break. 

If you are using Windows,

press 

Ctrl Alt Del 

to reset the system.

5.

An application program can occasionally lock up the
computer, making it unresponsive to the keyboard. If your
computer does not respond when you press the 

Num Lock

key, turn off your system, wait five seconds, and then turn
it back on and restart your application program.

6.

If none of these solutions solve your software problem,
contact the software manufacturer for technical support.

5-14 Troubleshooting

Содержание ActionNote 866C












































































































































Отзывы:

Нет отзывов