Epson Action Laser Action Laser Скачать руководство пользователя страница 150

Страница: 150 / 219

Transporting Your Printer

7. Remove the drum unit from the basket by lifting up on the green

handles. (Avoid touching or scratching the green drum.) Place

the drum in a plastic bag and seal the bag. Then wrap the drum

it its original packing materials (Be sure to use the black plastic

wrapper to protect the drum from light.)

8. Remove the developer unit from the basket. (Be sure not to

touch the roller on the developer unit.)

CAUTION:

Do not lift the developer unit by grasping the

toner cartridge. The cartridge may pop off and spill toner.

Also, do not remove the toner cartridge from the

developer unit.

9. Locate the red plastic protector, which was included with the

original packing materials. Place the protector under the

developer, fitting the gaps on the protector around the hooks

directly beneath the developer roller.

6-34

Maintenance and Transportation

Содержание Action Laser Action Laser




























































































































































































































Результаты поиска

Содержание Action Laser Action Laser

Отзывы:

Бренды по названию

Популярные бренды

Epson Action Laser Action Laser, Руководство пользователя

Результаты поиска

Содержание Action Laser Action Laser

Отзывы:

Бренды по названию

Популярные бренды