Important Safety Instructions
Although this monitor is designed to assure your safety, improper use can
cause electric shock or fire hazard. In order not to defeat the safeguards
incorporated in the monitor, observe the following safety instructions:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10
11
12
Read all of these instructions and save them for later reference.
Follow all warnings and instructions in this manual and marked on the
monitor.
The monitor contains shock hazard potential. Do not attempt to open or
remove any covers, and do not attempt to service the monitor yourself.
Refer all servicing to authorized service personnel.
Never push objects of any kind into the monitor through cabinet slots.
Do not expose the monitor to liquids, such as rain or spills.
Do not place the monitor on an unstable cart, stand, or table, and be
careful not to drop it.
Do not place the monitor near a heating appliance or in direct sunlight.
Intense heat can damage the monitor’s circuitry.
Slots and openings on the top, sides, and back of the cabinet are provided
for ventilation; do not block or cover these openings. Do not place the
monitor in a built-in insulator, such as a bookcase, unless proper
ventilation is provided.
Power supply voltages outside the monitor’s specified line voltage range
may harm the monitor. The monitor should be operated from the type
of power source indicated on the rear panel marking label.
Make sure the combined amperage rating for all products plugged into
the wall outlet used for the monitor does not exceed the amperage
rating of the wall outlet.
Use only the power cord supplied with the monitor. If you must use
another power cord, make sure it meets the applicable standards
(UL/ CSA).
Do not overload the computer inlet and extension cords as this can result
in fire or electric shock.
13. Be careful not to damage the power cord or plug
iii
