Epson 8300NL - PowerLite XGA LCD Projector, Руководство пользователя

Страница: 107 / 138

Solving Problems
107
The image contains static, noise, or distortion.
■
If you’re using a video player, make sure the correct
Video Signal
is selected in the Video menu (see page 70).
■
If you’re using a computer, press the
Auto
button (on the remote
control) or the
Auto/Enter
button (on the projector). This
automatically resets the tracking, sync, position, and resolution.
■
If you’re using a computer cable longer than 6 feet (2 meters), or
an extension cable, the image quality may be reduced.
■
Keep your computer and video cables away from the power cord
as much as possible to prevent interference.
■
The video signal may be split between the computer and the
projector. If you notice a decline in the projected image quality
when the image is displayed simultaneously on your laptop and
through the projector, turn off the laptop’s LCD display.
The image is blurry.
■
There may be dirt or smears on the lens. Clean the lens as
described on page 90.
■
Adjust the focus using the
Focus
button.
■
Make sure the lens is not fogged by condensation. You may need
to wait before using the projector after moving it from a cold
environment to a warm environment.
■
If you’re projecting from a computer, press the
Auto
button (on
the remote control) or the
Auto/Enter
button (on the
projector). This adjusts the tracking, sync, position, and
resolution settings.
■
Adjust the
Sharpness
setting on the Video menu (see page 64).
When you change video settings, you should be able to see the
effect on the screen immediately.