Epson 730c - PowerLite Projector Скачать руководство пользователя страница 1 | Manualshive

Страница: 1 / 17

Epson 730c - PowerLite Projector Скачать руководство пользователя страница 1

Page 1 of 1

EPSON

P

RODUCT

S

UPPORT

B

ULLETIN

Date:

8/30/2007

Originator:

DS

PSB #:

PSB.2007.08.001

Authorization:

Reference:

N/A

Total Pages:

1

Product(s):

Epson Projectors with an HD-15 VGA Analog/Component Input

Subject:

Elmo HV-110XG Document Camera and Projector Compatibility

This bulletin was created to inform you of an operational issue with the Elmo HV-110XG
Document Camera when initially connected to an Epson projector.

Problem:

When attempting to use the Elmo HV-110XG Document Camera connected via the VGA HD15
connection to display content from its document bed. When connected to the projector, the
projector displays only the

Blue Screen - No Signal

message and will blink off and on or

display just the Blue Screen - No Signal message. When a computer is connected to the Elmo
HV-110XG Document Camera and switched to Pass-Through mode, the computer image is
displayed correctly by the projector. When switching back to the document table source of the
Elmo HV-110XG Document Camera, the problem returns. The Elmo HV-110XG Document
Camera puts out a Progressive Scan 20fps signal to the projector's VGA Analog port. This
signal is detected at 15 kHz Vertical and 291.8 kHz Horizontal frequencies which are beyond
projector sync specifications.

Solution:

With the Elmo HV-110XG Document Camera powered on and connected to the projector via
the VGA computer cable, access the

Computer1/Computer2

setting in the projector menu

system and select the

Component

setting within the appropriate connection. This will allow

the Elmo HV-110XG Document Camera and projector to sync and the projector to display the
image of the document camera bed and its contents. However, the image will have a pink
cast. To eliminate the pink cast, change the projector setting from Component to

RGB

then to

Auto

and exit from the menu

.

The projected image will now look normal. This will now allow

the Elmo HV-110XG Document Camera to sync and display the image properly to any other
connected Epson projector without having to change the projector settings.

1
2
3
...
»

Содержание 730c - PowerLite Projector


















Отзывы:

Нет отзывов