Epson 3880 - Stylus Pro Color Inkjet Printer, Руководство по обслуживанию

Страница: 231 / 306

Epson Stylus Pro 3800/3800C/3850/3880/3885/3890 Revision C
ADJUSTMENT Standard Adjustment 231
5.3.6 Parameter Backup
† Purpose
Whenever the main board is replaced, parameters stored in the NVRAM on the
previous board should be backed up and written onto the new board using this
menu.
† Read & Save Procedure
1. Start up the Adjustment Program. The NVRAM Backup Utility will
automatically start. If the Adjustment Program is already running, execute
[Parameter Backup].
2. Turn the printer ON to start the printer in the ready mode.
3. Select the target printer from the [Printer Port].
4. Click [Read] to start reading the parameters. When reading is complete, the
serial number is displayed.
5. Click [Save] and save the readout parameters under a new file name.
6. To end, click [End].
† Write Procedure
1. Remove the all Ink Cartridges.
2. Remove the Maintenance Cartridge.
3. Start up the Adjustment Program. The NVRAM Backup Utility will
automatically start. If the Adjustment Program is already running, execute
[Parameter Backup].
4. Turn the printer ON while holding down the Menu/Right + Back/Left + Ink
Cover Open/UP + Paper Feed/Down buttons on the printer’s operation
panel to start the printer in the F/W update mode.
5. Click [File Open] to select and open the parameter backup file.
6. Click [Write] to start writing the parameter.
7. When the writing is completed, click [End] to exit the NVRAM Backup
Utility.
Figure 5-30. NVRAM Back Up Utility Screen Transition
C H E C K
P O I N T
When writing the parameters, turn the printer ON in F/W update
mode.
C H E C K
P O I N T
Clicking the "information display" button starts the NVRAM
Viewer, and you can browse the NVRAM information.
Serial number is
displayed after reading.
Select the Printer
Port
Execute
Reading
NVRAM Viewer starts up
Adjustment Program starts up