manualshive.com logo in svg

Epson 386, Руководство пользователя

"Philips 386" - переносной компьютер с высокой производительностью и долгим сроком службы. Ищите брошюру и руководство пользователя для бесплатного скачивания на {вашем веб-сайте}. Наслаждайтесь удобным пользованием этим мощным устройством и получите доступ ко всем его функциям.

Поделиться
Скачать
background image

FCC COMPLIANCE STATEMENT

FOR AMERICAN USERS

This equipment generates and uses radio frequency energy and if not installed
and used properly, that is, in strict accordance with the manufacturer’s
instructions, may cause interference to radio and television reception. It has
been type tested and found to comply with the limits for a Class B computing

device in accordance with the specifications in Subpart J of part 15 of FCC
Rules, which are designed to provide reasonable protection against such
interference in a residential installation. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does
cause interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

Reorient the receiving antenna

.

Relocate the computer with respect to the receiver
Move the computer away from the receiver
Plug the computer into a different outlet so that the computer and receiver

are on different branch circuits.

If necessary, the user should consult the dealer or an experienced radio/

television technician for additional suggestions. The user may find the following
booklet prepared by the Federal Communications Commission helpful:

“Television Interference Handbook.”

This booklet is available from the 

U.S. 

Government Printing Office,

Washington, DC 20402. Stock No. 004-000-00450-7.

Note:

If the interference stops, it was probably caused by the computer or its
peripheral devices. To further isolate the problem:

Disconnect the peripheral devices and their input/output cables one at a
time. If the interference stops, it is caused by either the peripheral device

or its I/O cable. These devices usually require shielded I/O cables. For
Epson peripheral devices, you can obtain the proper shielded cable from
your dealer. For non-Epson peripheral devices contact the manufacturer
or dealer for assistance.

W A R N I N G

This equipment has been certified to comply with the limits for a Class B

computing device, pursuant to Subpart J of Part 15 of FCC Rules. Only

peripherals (computer input/output devices, terminals, printers, etc.)
certified to comply with the Class B limits may be attached to this

computer. Operation with non-certified peripherals is likely to result in
interference to radio and TV reception.
The connection of a non-shielded equipment interface cable to this

equipment will invalidate the FCC Certification of this device and may

cause interference levels which exceed the limits established by the FCC
for this equipment.

iii

Содержание 386



























































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 386

Gateway 6-Bay mBTX PRO User Manual preview
6-Bay mBTX PRO
Бренд: Gateway Страницы: 182
Compaq Deskpro 2000 Service & Reference Manual preview
Deskpro 2000
Бренд: Compaq Страницы: 110
IBM System/370 Manual preview
System/370
Бренд: IBM Страницы: 194
Aaeon BOXER-6357VS Manual preview
BOXER-6357VS
Бренд: Aaeon Страницы: 116
Acer Altos 500L User Manual preview
Altos 500L
Бренд: Acer Страницы: 91
Acer Altos 600 Series User Manual preview
Altos 600 Series
Бренд: Acer Страницы: 128
Acer Altos 330 Series User Manual preview
Altos 330 Series
Бренд: Acer Страницы: 141
Acer Altos BrainSphere P150 F8 User Manual preview
Altos BrainSphere P150 F8
Бренд: Acer Страницы: 50
IBM PC/2 25 Hardware Maintenance Reference preview
PC/2 25
Бренд: IBM Страницы: 29
Dell Inspiron 1564 Service Manual preview
Inspiron 1564
Бренд: Dell Страницы: 57
Dell Inspiron 1764 Service Manual preview
Inspiron 1764
Бренд: Dell Страницы: 57
Dell Precision PP04X Quick Reference Manual preview
Precision PP04X
Бренд: Dell Страницы: 104
Dell Precision PD055 Quick Reference Manual preview
Precision PD055
Бренд: Dell Страницы: 142
Dell Precision M4300 Quick Reference Manual preview
Precision M4300
Бренд: Dell Страницы: 246
Dell Precision PD050 Quick Reference Manual preview
Precision PD050
Бренд: Dell Страницы: 360
Dell Precision R5400 Service Manual preview
Precision R5400
Бренд: Dell Страницы: 64
Dell Precision R5400 Specifications preview
Precision R5400
Бренд: Dell Страницы: 2
Dell Precision R3961 Quick Reference Manual preview
Precision R3961
Бренд: Dell Страницы: 122

Бренды по названию

Популярные бренды

Загрузить еще бренды