S a v e M o n e y a n d I m p r o v e Y o u r P r i n t i n g
MIS Associates Inc 2901 Auburn Rd Auburn Hills, MI 48326 800-445-8296
http://www.inksupply.com Fax: 248-289-6013 Email: [email protected]
Vacuum Filling An Empty CFS
Remove the caps from the ink bottles and replace them with the caps from the package
supplied with your CFS system.
The vacuum pump must be assembled as shown in the below photo. Check valve direction is
critical.
•
Remove the white plugs from the end of each of the tubes.
•
Attach the tube from the chamber that is going to be filled to the tube adapter on
the vacuum pump.
•
Pull back on the plunger, all the way. It takes a fair amount of force.
•
Push the plunger back down to the bottom to expel air.
•
Pull back on the plunger again, all the way and push down to expel air.
•
After 3 or 4 pulls, the plunger should snap to the bottom if let go.
•
Let the vacuum pump rest for about on minute. This is a leak test.
