Epsolar Tracer-4210RN, Инструкция по эксплуатации, Страница: 20 / 36

16

Load Work Mode Setting
Timer1 Setting indicator Work mode LED digital tube
Figure 4-4 Instruction figure on setting
Press the setting button once and setting indicators will be changed once among
timer 1, timer2 and battery type.
When timer 1 setting indicator is on, press the setting button for more than 5
seconds till the LED digital tube flashes. Then press the setting button till the desired
number appears according to the following table. The setting is finished when the
digital tube stop flashing.
Timer 2 setting is the same as timer 1 when the setting indicator is on timer2.
Timer2
Setting indicator
Battery type
Setting Indicator
Setting button