Epsolar eTracer ET4415BND, Руководство по эксплуатации

Страница: 28 / 44

24

Password
Press OK to enter the Password Set interface when the inverse cursor points to
Password Para item. Press ESC button to exit.
Note: The factory default password is
“
000000
”
.

Default Set
Under the main menu interface, when the inverse cursor to restore the default option,
press the OK button to enter to restore the default interface.
Under the main menu interface, when the inverse cursor
points to restore the default option, press the OK button to
enter to restore the default interface and clear all logs
including work log and event log. Note: all parameters will be
set to factory default and couldn‘t be recovery.

Device Message
Under the main menu interface, when the inverse cursor to the Dev Msg , press the
OK button to enter to Device Info interface.
The Model, software and hardware version and SN number are shown in this interface.
Default Set
No Yes
Clr Log Record
Retain clear
Sys Password
Old PSW 000000
New PSW 000000
ARM Msg.
Type: ET6415BND
Ver:V02.05+V02.60
SN:0420131210000001
DSP Msg.
Type: ET6415BND
Ver:V02.05+V02.60
SN: 0420131210000001