EPS EPS-100W-KIT, Руководство пользователя

Страница: 8 / 16

7 | P a g e
Figure 5: Connecting a male MC4 Connector to Solar Panel Cable
Figure 5 outlines how to attach a male MC4 Connector to the solar panel
cable (The female MC4 Connector can be attached in the same manner).
Step 1: Strip the solar panel cable to expose approximately 3/8” of the
stranded copper cable. Step 2: Slide the nut onto the solar panel cable.
Next, slide the strain relief and grommet onto the solar panel cable.
Lastly, firmly crimp the male pin onto the solar panel cable
Step 3:
Slide
the male pin into the MC4 Connector until it snaps into place. Step 4: Slide
the strain relief/grommet and nut back onto the MC4 Connector. Firmly
hand-tighten the nut.
MC4 Branch Connectors do NOT require any preparation. The metal
female and male pins are pre-installed at the factory inside the MC4
Branch Connectors. This means that the MC4 Branch Connectors
arrive“ready-to-use” and can simply be snapped into place.
Figure 6: MC4 Branch Connectors. The metal male and female are
pre-installed at the factory.
3.2.4 Connecting the Solar Inverter to the Battery
Bank and Panel
(Note: The instructions in this section need to be used in conjunction
with the included Solar Inverter Manual)
Before connecting the solar panel(s) to the inverter, connect the inverter
to the battery bank. See Figure 7 below.